Module Otfm

OpenType font decoder.

WARNING. This interface is subject to change in the future.

Otfm is an in-memory decoder for the OpenType font data format. It provides low-level access to OpenType fonts tables and functions to decode some of them.

Consult the limitations and example of use.

Note. Unless otherwise specified the strings returned are UTF-8 encoded.

References

Tags

type tag

The type for OpenType tags.

module Tag : sig ... end

Tags.

Unicode code points

For some reason OpenType allows the (textually meaningless) surrogate code points to be mapped to glyphs. Hence we deal with Unicode code points not scalar values.

type cp = int

The type for Unicode code points, ranges from 0x0000 to 0x10_FFFF. Any code point returned by Otfm is guaranteed to be in the range.

type cp_range = cp * cp

The type for Unicode code point ranges. Any range (u0, u1) returned by Otfm has u0 <= u1.

val is_cp : int -> bool

is_cp i is true if i is an Unicode code point.

val pp_cp : Format.formatter -> cp -> unit

pp_cp ppf cp prints an unspecified representation of cp on ppf.

Decode

type error_ctx = [
| `Table of tag
| `Offset_table
| `Table_directory
]

The type for error contexts.

type error = [
| `Unknown_flavour of tag
| `Unsupported_TTC
| `Unsupported_cmaps of (int * int * int) list
| `Unsupported_glyf_matching_points
| `Missing_required_table of tag
| `Unknown_version of error_ctx * int32
| `Unknown_loca_format of error_ctx * int
| `Unknown_composite_format of error_ctx * int
| `Invalid_offset of error_ctx * int
| `Invalid_cp of int
| `Invalid_cp_range of int * int
| `Invalid_postscript_name of string
| `Unexpected_eoi of error_ctx
]

The type for decoding errors.

Note. In case of `Invalid_poscript_name a string of bytes is returned.

val pp_error : Format.formatter -> [< error ] -> unit

pp_error ppf e prints an uspecified representation of e on ppf.

type src = [
| `String of string
]

The type for input sources.

type decoder

The type for OpenType font decoders.

val decoder : [< src ] -> decoder

decoder src is a decoder decoding from src.

val decoder_src : decoder -> src

decoder_src d is d's input source.

Table decoding

These functions can be used in any order and are robust: when they return an error the decoder is back to a consistent state and can be used further. However if flavour or table_list returns an error you can safely assume that all other functions will. The fields are in general not documented please refer to the OpenType specification for details.

type flavour = [
| `TTF
| `CFF
]

The type for OpenType flavours.

val flavour : decoder -> (flavourerror) result

decode_flavour d is the flavour of the font decoded by d.

val table_list : decoder -> (tag listerror) result

table_list t is the list of tables of the font decoded by d.

val table_mem : decoder -> tag -> (bool, error) result

table_mem d t is true if table t is in the font decoded by d.

val table_raw : decoder -> tag -> (string optionerror) result

table_raw d t is the (unpadded) data of the table t as a string if the table t exists.

Convenience decodes

These functions lookup data in the right table.

val glyph_count : decoder -> (int, error) result

glyph_count d is the number of glyphs in the font (bounded by 65535).

val postscript_name : decoder -> (string optionerror) result

poscript_name d is the PostScript name of d. Looks up and validates as mandated by the OTF standard, don't rely on name if you really need this information.

cmap table

type glyph_id = int

The type for glyph ids, from 0 to 65534.

type map_kind = [
| `Glyph
| `Glyph_range
]

The type for map kinds.

Determines how an unicode range (u0, u1) and a glyph id gid must be interpreted in the folding function of cmap.

  • `Glyph all characters in the range map to to gid.
  • `Glyph_range, u0 maps to gid, u0 + 1 to gid + 1, ... and u1 to gid + (u1 - u0)
val cmap : decoder -> ('a -> map_kind -> cp_range -> glyph_id -> 'a) -> 'a -> ((int * int * int) * 'aerror) result

cmap d f acc folds over a mapping from unicode scalar values to glyph ids by reading the cmap table. The returned triple of integer indicates the platform id, encoding id and format of the cmap used.

Limitations. Only the format 13 (last resort font), format 12 (UCS-4) and format 4 (UCS-2) cmap table formats are supported.

If multiple tables are present, it favours 13 over 12 over 4. If multiple tables of the same format are present it takes the first one it finds.

If no supported cmap table is found the error `Unsupported_cmaps is returned with the list of platform id, encoding id, format available in the font.

glyf table

type glyf_loc

The type for glyph locations. See loca table.

type glyph_simple_descr = (bool * int * int) list list

The type for simple glyph descriptions. Lists of contours, contours are list of points with a boolean indicating whether the point is on or off curve.

type glyph_composite_descr = (glyph_id * (int * int) * (float * float * float * float) option) list

The type for glyph composites. A list of components made of a glyph id, a translation and an optional linear transform a b c d (column major).

type glyph_descr = [ `Simple of glyph_simple_descr | `Composite of glyph_composite_descr ] * (int * int * int * int)

The type for glyph descriptions. A simple or composite descriptions with the glyph's (minx, miny, maxx, maxy)'s bounding box.

val glyf : decoder -> glyf_loc -> (glyph_descrerror) result

glyf d loc is the glyph descroption located at loc by reading the glyf table. Glyph locations are obtainted via loca.

type head = {
head_font_revision : int32;
head_flags : int;
head_units_per_em : int;
head_created : float;(*

Unix timestamp.

*)
head_modified : float;(*

Unix timestamp.

*)
head_xmin : int;
head_ymin : int;
head_xmax : int;
head_ymax : int;
head_mac_style : int;
head_lowest_rec_ppem : int;
head_index_to_loc_format : int;
}

The type for representing head tables.

val head : decoder -> (headerror) result

head d is the head table.

hhea table

type hhea = {
hhea_ascender : int;
hhea_descender : int;
hhea_line_gap : int;
hhea_advance_width_max : int;
hhea_min_left_side_bearing : int;
hhea_min_right_side_bearing : int;
hhea_xmax_extent : int;
hhea_caret_slope_rise : int;
hhea_caret_slope_run : int;
hhea_caret_offset : int;
}

The type for hhea tables.

val hhea : decoder -> (hheaerror) result

hhea d is the hhea table.

hmtx table

val hmtx : decoder -> ('a -> glyph_id -> int -> int -> 'a) -> 'a -> ('aerror) result

hmtx d f acc folds over the horizontal metrics of the font by reading the hmtx table. f is applied on each entry with f acc' gid adv lsb with gid the glyph id (guaranteed to range, in order, from 0 to glyph count minus one), adv the (unsigned) advance width, and lsb the (signed) left side bearing.

name table

type lang = string

The type for BCP 47 language tags.

val name : decoder -> ('a -> int -> lang -> string -> 'a) -> 'a -> ('aerror) result

name d f acc folds over the name records of the font by reading the name table. f is applied on each name id entry with f acc' nid lang name with nid the name id, lang the language tag, and name the UTF-8 encoded name value.

Note. The module normalizes Windows language ids to lowercased BCP 47 ids. Language tags found in language tag records should be BCP 47 language tags but are not checked for conformance.

Tip. If you are looking for the postcript name use postscript_name.

Limitations. Lookups data only in platform ids 0, 2 and 3 (Unicode, ISO and Windows) with UTF-16BE encoding and reports only the data of the first one it finds for a given name id.

OS/2 table

type os2 = {
os2_x_avg_char_width : int;
os2_us_weight_class : int;
os2_us_width_class : int;
os2_fs_type : int;
os2_y_subscript_x_size : int;
os2_y_subscript_y_size : int;
os2_y_subscript_x_offset : int;
os2_y_subscript_y_offset : int;
os2_y_superscript_x_size : int;
os2_y_superscript_y_size : int;
os2_y_superscript_x_offset : int;
os2_y_superscript_y_offset : int;
os2_y_strikeout_size : int;
os2_y_strikeout_position : int;
os2_family_class : int;
os2_panose : string;(*

10 bytes

*)
os2_ul_unicode_range1 : int32;
os2_ul_unicode_range2 : int32;
os2_ul_unicode_range3 : int32;
os2_ul_unicode_range4 : int32;
os2_ach_vend_id : int32;
os2_fs_selection : int;
os2_us_first_char_index : int;
os2_us_last_char_index : int;
os2_s_typo_ascender : int;
os2_s_type_descender : int;
os2_s_typo_linegap : int;
os2_us_win_ascent : int;
os2_us_win_descent : int;
os2_ul_code_page_range_1 : int32 option;
os2_ul_code_page_range_2 : int32 option;
os2_s_x_height : int option;
os2_s_cap_height : int option;
os2_us_default_char : int option;
os2_us_break_char : int option;
os2_us_max_context : int option;
}

The type for OS/2 tables.

val os2 : decoder -> (os2error) result

os2 d is the OS/2 table.

kern table

type kern_info = {
kern_dir : [ `H | `V ];
kern_kind : [ `Min | `Kern ];
kern_cross_stream : bool;
}

The type for kerning (sub)table information.

val kern : decoder -> ('a -> kern_info -> [ `Skip | `Fold ] * 'a) -> ('a -> glyph_id -> glyph_id -> int -> 'a) -> 'a -> ('aerror) result

kern d t p acc folds over the kerning tables of d by reading the kern table. t is called on each new (sub)table, the table pairs are skipped if it returns `Skip otherwise p acc' left right value is called on each kerning pair of the table. The function returns acc if there is no kern table.

Limitations. Only format 0 kerning tables are supported.

loca table

val loca : decoder -> glyph_id -> (glyf_loc optionerror) result

loca d gid looks up the location of the glyph with id gid by reading the loca table. The result can be used with glyf to lookup the glyph.

Limitations

As it stands Otfm has the following limitations. Some of these may be lifted in the future and a few of these can be overcome by pre-processing your font (e.g. extract .ttc files to .ttf, or removing hinting information to reduce the font size). See also the individual table decoding functions for other limitations.

Examples

The following code prints the postscript name of the font on stdout.

let otf_postscript_name bytes =
  let d = Otfm.decoder (`String bytes) in
  match Otfm.postscript_name d with
  | Error e -> Format.eprintf "@[%a@]@." Otfm.pp_error e
  | Ok (Some n) -> Format.printf "%s@." n;
  | Ok None -> ()