Module `Stdlib__bigarray`

Large, multi-dimensional, numerical arrays.

This module implements multi-dimensional arrays of integers and floating-point numbers, thereafter referred to as 'Bigarrays', to distinguish them from the standard OCaml arrays described in Array.

The implementation allows efficient sharing of large numerical arrays between OCaml code and C or Fortran numerical libraries.

The main differences between 'Bigarrays' and standard OCaml arrays are as follows:

Bigarrays are not limited in size, unlike OCaml arrays. (Normal float arrays are limited to 2,097,151 elements on a 32-bit platform, and normal arrays of other types to 4,194,303 elements.)
Bigarrays are multi-dimensional. Any number of dimensions between 0 and 16 is supported. In contrast, OCaml arrays are mono-dimensional and require encoding multi-dimensional arrays as arrays of arrays.
Bigarrays can only contain integers and floating-point numbers, while OCaml arrays can contain arbitrary OCaml data types.
Bigarrays provide more space-efficient storage of integer and floating-point elements than normal OCaml arrays, in particular because they support 'small' types such as single-precision floats and 8 and 16-bit integers, in addition to the standard OCaml types of double-precision floats and 32 and 64-bit integers.
The memory layout of Bigarrays is entirely compatible with that of arrays in C and Fortran, allowing large arrays to be passed back and forth between OCaml code and C / Fortran code with no data copying at all.
Bigarrays support interesting high-level operations that normal arrays do not provide efficiently, such as extracting sub-arrays and 'slicing' a multi-dimensional array along certain dimensions, all without any copying.

Users of this module are encouraged to do open Bigarray in their source, then refer to array types and operations via short dot notation, e.g. Array1.t or Array2.sub.

Bigarrays support all the OCaml ad-hoc polymorphic operations:

comparisons (=, <>, <=, etc, as well as Stdlib.compare);
hashing (module Hash);
and structured input-output (the functions from the Marshal module, as well as Stdlib.output_value and Stdlib.input_value).

Element kinds

Bigarrays can contain elements of the following kinds:

IEEE single precision (32 bits) floating-point numbers (Bigarray.float32_elt),
IEEE double precision (64 bits) floating-point numbers (Bigarray.float64_elt),
IEEE single precision (2 * 32 bits) floating-point complex numbers (Bigarray.complex32_elt),
IEEE double precision (2 * 64 bits) floating-point complex numbers (Bigarray.complex64_elt),
8-bit integers (signed or unsigned) (Bigarray.int8_signed_elt or Bigarray.int8_unsigned_elt),
16-bit integers (signed or unsigned) (Bigarray.int16_signed_elt or Bigarray.int16_unsigned_elt),
OCaml integers (signed, 31 bits on 32-bit architectures, 63 bits on 64-bit architectures) (Bigarray.int_elt),
32-bit signed integers (Bigarray.int32_elt),
64-bit signed integers (Bigarray.int64_elt),
platform-native signed integers (32 bits on 32-bit architectures, 64 bits on 64-bit architectures) (Bigarray.nativeint_elt).

Each element kind is represented at the type level by one of the *_elt types defined below (defined with a single constructor instead of abstract types for technical injectivity reasons).

since: 4.07.0 Moved from otherlibs to stdlib.

type float32_elt = | Float32_elt

type float64_elt = | Float64_elt

type int8_signed_elt = | Int8_signed_elt

type int8_unsigned_elt = | Int8_unsigned_elt

type int16_signed_elt = | Int16_signed_elt

type int16_unsigned_elt = | Int16_unsigned_elt

type int32_elt = | Int32_elt

type int64_elt = | Int64_elt

type int_elt = | Int_elt

type nativeint_elt = | Nativeint_elt

type complex32_elt = | Complex32_elt

type complex64_elt = | Complex64_elt

type ('a, 'b) kind = | Float32 : (float, float32_elt) kind | Float64 : (float, float64_elt) kind | Int8_signed : (int, int8_signed_elt) kind | Int8_unsigned : (int, int8_unsigned_elt) kind | Int16_signed : (int, int16_signed_elt) kind | Int16_unsigned : (int, int16_unsigned_elt) kind | Int32 : (int32, int32_elt) kind | Int64 : (int64, int64_elt) kind | Int : (int, int_elt) kind | Nativeint : (nativeint, nativeint_elt) kind | Complex32 : (Stdlib.Complex.t, complex32_elt) kind | Complex64 : (Stdlib.Complex.t, complex64_elt) kind | Char : (char, int8_unsigned_elt) kind

To each element kind is associated an OCaml type, which is the type of OCaml values that can be stored in the Bigarray or read back from it. This type is not necessarily the same as the type of the array elements proper: for instance, a Bigarray whose elements are of kind float32_elt contains 32-bit single precision floats, but reading or writing one of its elements from OCaml uses the OCaml type float, which is 64-bit double precision floats.

The GADT type ('a, 'b) kind captures this association of an OCaml type 'a for values read or written in the Bigarray, and of an element kind 'b which represents the actual contents of the Bigarray. Its constructors list all possible associations of OCaml types with element kinds, and are re-exported below for backward-compatibility reasons.

Using a generalized algebraic datatype (GADT) here allows to write well-typed polymorphic functions whose return type depend on the argument type, such as:

let zero : type a b. (a, b) kind -> a = function
  | Float32 -> 0.0 | Complex32 -> Complex.zero
  | Float64 -> 0.0 | Complex64 -> Complex.zero
  | Int8_signed -> 0 | Int8_unsigned -> 0
  | Int16_signed -> 0 | Int16_unsigned -> 0
  | Int32 -> 0l | Int64 -> 0L
  | Int -> 0 | Nativeint -> 0n
  | Char -> '\000'

val float32 : (float, float32_elt) kind: See Bigarray.char.

val float64 : (float, float64_elt) kind: See Bigarray.char.

val complex32 : (Stdlib.Complex.t, complex32_elt) kind: See Bigarray.char.

val complex64 : (Stdlib.Complex.t, complex64_elt) kind: See Bigarray.char.

val int8_signed : (int, int8_signed_elt) kind: See Bigarray.char.

val int8_unsigned : (int, int8_unsigned_elt) kind: See Bigarray.char.

val int16_signed : (int, int16_signed_elt) kind: See Bigarray.char.

val int16_unsigned : (int, int16_unsigned_elt) kind: See Bigarray.char.

val int : (int, int_elt) kind: See Bigarray.char.

val int32 : (int32, int32_elt) kind: See Bigarray.char.

val int64 : (int64, int64_elt) kind: See Bigarray.char.

val nativeint : (nativeint, nativeint_elt) kind: See Bigarray.char.

val char : (char, int8_unsigned_elt) kind: As shown by the types of the values above, Bigarrays of kind float32_elt and float64_elt are accessed using the OCaml type float. Bigarrays of complex kinds complex32_elt, complex64_elt are accessed with the OCaml type Complex.t. Bigarrays of integer kinds are accessed using the smallest OCaml integer type large enough to represent the array elements: int for 8- and 16-bit integer Bigarrays, as well as OCaml-integer Bigarrays; int32 for 32-bit integer Bigarrays; int64 for 64-bit integer Bigarrays; and nativeint for platform-native integer Bigarrays. Finally, Bigarrays of kind int8_unsigned_elt can also be accessed as arrays of characters instead of arrays of small integers, by using the kind value char instead of int8_unsigned.

val kind_size_in_bytes : ('a, 'b) kind -> int

kind_size_in_bytes k is the number of bytes used to store an element of type k.

since: 4.03.0

Array layouts

type c_layout = | C_layout_typ: See Bigarray.fortran_layout.

type fortran_layout = | Fortran_layout_typ

To facilitate interoperability with existing C and Fortran code, this library supports two different memory layouts for Bigarrays, one compatible with the C conventions, the other compatible with the Fortran conventions.

In the C-style layout, array indices start at 0, and multi-dimensional arrays are laid out in row-major format. That is, for a two-dimensional array, all elements of row 0 are contiguous in memory, followed by all elements of row 1, etc. In other terms, the array elements at (x,y) and (x, y+1) are adjacent in memory.

In the Fortran-style layout, array indices start at 1, and multi-dimensional arrays are laid out in column-major format. That is, for a two-dimensional array, all elements of column 0 are contiguous in memory, followed by all elements of column 1, etc. In other terms, the array elements at (x,y) and (x+1, y) are adjacent in memory.

Each layout style is identified at the type level by the phantom types Bigarray.c_layout and Bigarray.fortran_layout respectively.

Supported layouts

The GADT type 'a layout represents one of the two supported memory layouts: C-style or Fortran-style. Its constructors are re-exported as values below for backward-compatibility reasons.

type 'a layout = | C_layout : c_layout layout | Fortran_layout : fortran_layout layout

val c_layout : c_layout layout
val fortran_layout : fortran_layout layout

Generic arrays (of arbitrarily many dimensions)

module Genarray : sig ... end

Zero-dimensional arrays

module Array0 : sig ... end: Zero-dimensional arrays. The Array0 structure provides operations similar to those of Bigarray.Genarray, but specialized to the case of zero-dimensional arrays that only contain a single scalar value. Statically knowing the number of dimensions of the array allows faster operations, and more precise static type-checking.

One-dimensional arrays

module Array1 : sig ... end: One-dimensional arrays. The Array1 structure provides operations similar to those of Bigarray.Genarray, but specialized to the case of one-dimensional arrays. (The Array2 and Array3 structures below provide operations specialized for two- and three-dimensional arrays.) Statically knowing the number of dimensions of the array allows faster operations, and more precise static type-checking.

Two-dimensional arrays

module Array2 : sig ... end: Two-dimensional arrays. The Array2 structure provides operations similar to those of Bigarray.Genarray, but specialized to the case of two-dimensional arrays.

Three-dimensional arrays

module Array3 : sig ... end: Three-dimensional arrays. The Array3 structure provides operations similar to those of Bigarray.Genarray, but specialized to the case of three-dimensional arrays.

Coercions between generic Bigarrays and fixed-dimension Bigarrays

val genarray_of_array0 : ('a, 'b, 'c) Array0.t -> ('a, 'b, 'c) Genarray.t

Return the generic Bigarray corresponding to the given zero-dimensional Bigarray.

since: 4.05.0

val genarray_of_array1 : ('a, 'b, 'c) Array1.t -> ('a, 'b, 'c) Genarray.t: Return the generic Bigarray corresponding to the given one-dimensional Bigarray.

val genarray_of_array2 : ('a, 'b, 'c) Array2.t -> ('a, 'b, 'c) Genarray.t: Return the generic Bigarray corresponding to the given two-dimensional Bigarray.

val genarray_of_array3 : ('a, 'b, 'c) Array3.t -> ('a, 'b, 'c) Genarray.t: Return the generic Bigarray corresponding to the given three-dimensional Bigarray.

val array0_of_genarray : ('a, 'b, 'c) Genarray.t -> ('a, 'b, 'c) Array0.t

Return the zero-dimensional Bigarray corresponding to the given generic Bigarray. Raise Invalid_argument if the generic Bigarray does not have exactly zero dimension.

since: 4.05.0

val array1_of_genarray : ('a, 'b, 'c) Genarray.t -> ('a, 'b, 'c) Array1.t: Return the one-dimensional Bigarray corresponding to the given generic Bigarray. Raise Invalid_argument if the generic Bigarray does not have exactly one dimension.

val array2_of_genarray : ('a, 'b, 'c) Genarray.t -> ('a, 'b, 'c) Array2.t: Return the two-dimensional Bigarray corresponding to the given generic Bigarray. Raise Invalid_argument if the generic Bigarray does not have exactly two dimensions.

val array3_of_genarray : ('a, 'b, 'c) Genarray.t -> ('a, 'b, 'c) Array3.t: Return the three-dimensional Bigarray corresponding to the given generic Bigarray. Raise Invalid_argument if the generic Bigarray does not have exactly three dimensions.

Re-shaping Bigarrays

val reshape : ('a, 'b, 'c) Genarray.t -> int array -> ('a, 'b, 'c) Genarray.t: reshape b [|d1;...;dN|] converts the Bigarray b to a N-dimensional array of dimensions d1...dN. The returned array and the original array b share their data and have the same layout. For instance, assuming that b is a one-dimensional array of dimension 12, reshape b [|3;4|] returns a two-dimensional array b' of dimensions 3 and 4. If b has C layout, the element (x,y) of b' corresponds to the element x * 3 + y of b. If b has Fortran layout, the element (x,y) of b' corresponds to the element x + (y - 1) * 4 of b. The returned Bigarray must have exactly the same number of elements as the original Bigarray b. That is, the product of the dimensions of b must be equal to i1 * ... * iN. Otherwise, Invalid_argument is raised.

val reshape_0 : ('a, 'b, 'c) Genarray.t -> ('a, 'b, 'c) Array0.t

Specialized version of Bigarray.reshape for reshaping to zero-dimensional arrays.

since: 4.05.0

val reshape_1 : ('a, 'b, 'c) Genarray.t -> int -> ('a, 'b, 'c) Array1.t: Specialized version of Bigarray.reshape for reshaping to one-dimensional arrays.

val reshape_2 : ('a, 'b, 'c) Genarray.t -> int -> int -> ('a, 'b, 'c) Array2.t: Specialized version of Bigarray.reshape for reshaping to two-dimensional arrays.

val reshape_3 : ('a, 'b, 'c) Genarray.t -> int -> int -> int -> ('a, 'b, 'c) Array3.t: Specialized version of Bigarray.reshape for reshaping to three-dimensional arrays.